Skip to content
Back to news
Milestone

First miniature DC home network live in Delft

Our test setup connects solar, storage and a charging point fully on direct current — every connection point measurable.

1 min read
A test rig of a miniature DC home network on a board: a small solar panel, a battery module, a charge point and a DC converter

The test rig in Delft is running. Solar panels, a battery pack, a charge point and the house installation all hang on one shared 48 V direct-current bus, with a single controlled coupling to the public grid.

The point of the rig is not to prove direct current is "better". It is to measure what actually happens: how much energy goes in and out at each connection point, how the bus responds to a sudden charging session, and where the losses sit.

What we can already see

Every connection point sits behind its own converter, and that converter measures and controls itself. Per-node telemetry therefore comes with the architecture — an AC installation can do it too, but it takes a meter per group and an inverter per source.

The grid coupling stays the only place where the rig touches the AC world. For the solar-to-battery route that means zero crossings between AC and DC, where the same route on an AC installation makes two.

The rig stays up over the coming months. We will publish the measurement series once there is enough seasonal spread to say something meaningful about it.

Staying informed

Questions about direct current?

We are happy to think along about where DC makes the difference for you. No sales pitch — just a conversation.